Linde Forklift Parts, Supplied & Fitted
HYLIFT is an independent Linde parts specialist in the UAE — genuine and quality-matched parts for Linde H-series diesel and gas trucks, E-series and X-series electric trucks and reach trucks, from the hydrostatic drive and hydraulics to the electronics and mast.
Keep your Linde running to spec
Linde trucks are precision machines. The hydrostatic drive and load-sensing hydraulics are what make them so smooth and controllable — and that precision is exactly why they reward correct, to-spec parts and punish the wrong ones.
As an independent supplier we're not tied to a single price list: we source genuine Linde parts and quality-matched aftermarket equivalents, and give you a straight recommendation on which to use where. Tell us the truck and what's failed, and we'll get you the correct part with an honest read on cost and lead time — genuine where it matters, a quality equivalent where it doesn't.
The honest call, part by part
A precision truck rewards the right choice — genuine where the part is hydrostatic, electronic, or safety-critical, a quality equivalent where it isn't:
| Part | Our recommendation | Why |
|---|---|---|
| Hydrostatic drive pumps, motors, valves | Genuine | The heart of a Linde — precision hydrostatic parts, highly model-specific. |
| Working hydraulics (cylinders, valves, seals) | Genuine (usually) | Linde's precise, load-sensing hydraulics reward exact-spec parts. |
| Electronics, controllers, battery | Genuine | Model-specific — aftermarket often won't communicate with the truck. |
| Mast, forks & lift chains | Genuine | Safety-critical and load-rated — must hold the rated load. |
| Brakes, axles & steering | Genuine | Safety-critical; oil-immersed brakes and axle parts must be to spec. |
| Filters, belts, hoses, consumables | Quality aftermarket OK | Commodity items; a good-brand equivalent performs and saves cost. |
Parts across the whole truck
From the hydrostatic drive and hydraulics to the electronics and mast, for IC and electric Linde trucks alike.
Hydrostatic drive & transmission
Drive pumps, wheel and hub motors, hydrostatic control valves, and hoses — Linde's signature drive uses these instead of a clutch, gearbox, and torque converter, so they're precision, model-specific parts.
Working hydraulics
Lift and tilt cylinders, seal kits, load-sensing valves, and pumps. Linde's precise, load-sensing hydraulics are what make the truck smooth to control — and they reward exact-spec parts.
Electronics, controllers & battery
Traction and lift controllers, contactors, display units, sensors, and battery accessories for E-series and X-series electric Linde trucks, including Li-ion — model-specific components matched to the machine.
Mast, forks & chains
Mast channels, rollers, lift and leaf chains, and forks — the load-bearing parts we keep genuine because they must hold the rated load and match spec exactly.
Brakes, axles & steering
Oil-immersed brakes, brake components, drive and steer axle parts, and bearings — the safety-critical parts a Linde truck can't run without.
Engine & cooling
Filters, belts, gaskets, water pumps, and cooling parts for Linde H-series diesel and gas engines, plus the routine consumables that keep a service interval on track in the UAE heat.
The hydrostatic difference
Linde pioneered the hydrostatic drive, and it's still what sets its trucks apart. Instead of a clutch, gearbox, and torque converter, a Linde uses hydraulic drive pumps and wheel motors — which is why it feels so smooth and precise, and why the drivetrain parts, and the know-how to fit them, are specialist rather than off-the-shelf.
We supply the genuine hydrostatic components — drive pumps, wheel motors, and control valves — and our technicians fit them. Where a pump or motor needs a full specialist overhaul rather than a straight part swap, we'll tell you honestly and advise the best route, rather than guess at a job that a precision drive won't forgive.
From H-series diesel to the electric range
We supply parts across the Linde range — the IC and electric counterbalance trucks, reach trucks, and warehouse equipment you're most likely running, on both battery types:
- Linde H-series (diesel / gas)
- Linde E-series (electric)
- Linde X-series (electric)
- Reach trucks
- Warehouse trucks (pallet / stacker / order picker)
- Lead-acid & Li-ion
Model and serial number get us there fast
Most wasted downtime on a Linde comes from fitting the wrong part, not the fault itself — and on a precision truck the wrong part rarely settles in quietly. The data plate gives us the model and serial number, which pins down the correct parts list. A photo of the old part or its number confirms the exact fit, which matters most for hydrostatic and electronic components. Get that right up front and the part goes on once, not twice.
We supply and we fit
A part on a shelf doesn't fix a forklift. HYLIFT's technicians can install the Linde parts we supply and fold the work into a repair or an AMC, so the truck leaves working and the job is warranted as one piece of work — not a part you're left to fit yourself. Same-day support in Dubai, and fast scheduled service across the rest of the UAE.
Linde parts questions, answered
Do you supply genuine Linde forklift parts?
Yes, we source genuine Linde parts, and we also supply quality-matched aftermarket for routine items. We're an independent supplier, not an authorized Linde dealer, so you get both options and an honest recommendation for each part rather than defaulting to the most expensive one.
Which Linde trucks can you supply parts for?
Linde H-series diesel and gas trucks, E-series and X-series electric trucks, reach trucks, and warehouse equipment such as pallet trucks, stackers, and order pickers — both lead-acid and Li-ion. Send the model and serial number and we'll find the correct part.
Can you supply and fit Linde hydrostatic drive parts?
Yes. We supply the genuine hydrostatic components — drive pumps, wheel motors, and control valves — and our technicians fit them. Where a pump or motor needs a full specialist overhaul rather than a part swap, we'll tell you straight and advise the best route rather than guess at it.
Genuine or aftermarket for Linde parts?
Genuine for the hydrostatic drive, hydraulics, electronics, mast, and brakes — the precision and safety-critical parts. Quality aftermarket is usually fine for filters, belts, hoses, and routine consumables. We'll tell you which is the smart call for the part you need.
How do I identify the right Linde part?
The data plate on the truck gives the model and serial number, which gets us to the correct Linde parts list. A photo of the old part or its number confirms the exact fit — that matters most for hydrostatic and electronic parts.
Can you fit the Linde parts as well as supply them?
Yes. Our technicians can install the parts we supply and fold the work into a repair or an AMC, so the truck leaves working and the whole job is warranted as one piece of work rather than left for you to arrange.
Running a mixed fleet? See ourforklift spare parts hub for every major brand — or, choosing between power types, our guide toelectric vs diesel forklifts in the UAE.
Get the right Linde part
Send us your Linde truck's model and serial number — with a photo of the old part if you have one — and we'll confirm the correct part, genuine or quality aftermarket, with price and lead time across the UAE.