Jungheinrich Forklift & Warehouse Parts, Supplied & Fitted
HYLIFT is an independent Jungheinrich parts specialist in the UAE — genuine and quality-matched parts for EFG electric trucks, ETV/ETM reach trucks, EKS/EKX order pickers and pallet trucks, from the traction electronics and Li-ion energy system to the mast, hydraulics, and running gear.
Keep your Jungheinrich warehouse fleet moving
Jungheinrich is a warehouse and intralogistics specialist — reach trucks, order pickers, and electric trucks built around electronics and integrated energy management. That's what makes them so productive in tight aisles and at height, and it's exactly why they reward correct, to-spec parts and punish the wrong ones.
As an independent supplier we're not tied to a single price list: we source genuine Jungheinrich parts and quality-matched aftermarket equivalents, and give you a straight recommendation on which to use where. Tell us the truck and what's failed, and we'll get you the correct part with an honest read on cost and lead time — genuine where it matters, a quality equivalent where it doesn't.
The honest call, part by part
A warehouse fleet rewards the right choice — genuine where the part is electronic, load-bearing, or safety-critical, a quality equivalent where it isn't:
| Part | Our recommendation | Why |
|---|---|---|
| Li-ion batteries, BMS & cell packs | Genuine / specialist | Integrated into the truck's energy management and safety-critical — we supply and advise, but don't open cell packs. |
| Traction & lift electronics, controllers | Genuine | Model-specific — aftermarket often won't communicate with the truck's CAN system. |
| Order-picker platform, cage & lift chains | Genuine | These carry a person at height — safety-critical, no compromise. |
| Mast, forks & lift chains | Genuine | Load-rated and safety-critical; must hold the rated load at height. |
| Hydraulics (cylinders, valves, seals) | Genuine (usually) | Reach and lift hydraulics reward exact-spec parts on a truck that runs all shift. |
| Wheels, castors, filters, consumables | Quality aftermarket OK | Commodity wear items; a good-brand equivalent performs and saves cost. |
Parts across the whole truck
From the traction electronics and Li-ion energy system to the mast, hydraulics, and running gear, for reach trucks, order pickers, and electric counterbalance trucks alike.
Traction & lift electronics
Three-phase AC traction and lift controllers, contactors, display and CAN-bus modules, sensors, and wiring parts. Jungheinrich trucks are electronics-led, so these are model-specific components matched to the machine — not generic swaps.
Lithium-ion & lead-acid energy systems
Chargers, connectors, cabling, BMS accessories, and battery hardware for Jungheinrich's Li-ion and lead-acid trucks. Jungheinrich builds energy management into the truck, so the charging and battery parts have to match the system, not just the voltage.
Order-picker lift & platform parts
Lift chains, cylinders, guide rollers, operator platform and cage components, and controls for EKS/EKX high-level and man-up order pickers — the parts that carry a person as well as a load, so they stay genuine.
Mast, forks & chains
Mast channels, rollers, lift and leaf chains, and forks for reach and counterbalance trucks — the load-bearing parts we keep genuine because they must hold the rated load at height and match spec exactly.
Hydraulics
Lift, tilt, and reach cylinders, seal kits, valves, pumps, and hoses for ETV/ETM reach trucks and EFG counterbalance trucks — the working hydraulics that a warehouse truck lives on all shift.
Wheels, castors, brakes & steering
Polyurethane load and drive wheels, castors, brake components, and steering and narrow-aisle guidance parts — the running gear that wears fastest on hard warehouse floors and tight aisles.
Narrow aisles, height & energy systems
Jungheinrich's strength is the warehouse: very-narrow-aisle (VNA) trucks, high-level and man-up order pickers, and reach trucks that work at height in tight racking. On those machines the parts that matter most aren't the engine — there isn't one — they're the platform and cage that carry the operator up, the lift chains and guidance that keep the run safe, and the electronics and Li-ion energy system that keep the truck available across shifts.
We treat those parts as safety-critical and keep them genuine. We supply chargers, connectors, and battery hardware for Li-ion and lead-acid trucks and advise on the energy setup — but for safety we don't open Li-ion cell packs; where a pack needs specialist work we say so and point you the right way, rather than guess at a job that an integrated energy system won't forgive.
From EFG electric trucks to EKS order pickers
We supply parts across the Jungheinrich range — the reach trucks, order pickers, counterbalance trucks, and pallet trucks you're most likely running in a UAE warehouse, on both battery types:
- EFG electric counterbalance
- ETV / ETM reach trucks
- EKS / EKX order pickers (incl. VNA man-up)
- ERE / ERD / EJE pallet trucks
- ECE low-level order pickers
- Lead-acid & Li-ion
Model and serial number get us there fast
Most wasted downtime on a Jungheinrich comes from fitting the wrong part, not the fault itself — and on an electronics-led warehouse truck the wrong part rarely settles in quietly. The data plate gives us the model and serial number, which pins down the correct parts list. A photo of the old part or its number confirms the exact fit, which matters most for electronic, energy-system, and order-picker components. Get that right up front and the part goes on once, not twice.
We supply and we fit
A part on a shelf doesn't fix a forklift. HYLIFT's technicians can install the Jungheinrich parts we supply and fold the work into a repair or an AMC, so the truck leaves working and the job is warranted as one piece of work — not a part you're left to fit yourself. Same-day support in Dubai, and fast scheduled service across the rest of the UAE.
Jungheinrich parts questions, answered
Do you supply genuine Jungheinrich forklift parts?
Yes, we source genuine Jungheinrich parts, and we also supply quality-matched aftermarket for routine wear items. We're an independent supplier, not an authorized Jungheinrich dealer, so you get both options and an honest recommendation for each part rather than defaulting to the most expensive one.
Which Jungheinrich trucks can you supply parts for?
EFG electric counterbalance trucks, ETV and ETM reach trucks, EKS and EKX order pickers including very-narrow-aisle man-up machines, and ERE/ERD/EJE pallet trucks and ECE low-level order pickers — on both lead-acid and Li-ion. Send the model and serial number and we'll find the correct part.
Can you supply Jungheinrich lithium-ion batteries and chargers?
Yes — we supply chargers, connectors, cabling, and battery accessories, and we advise on Li-ion energy setups. Jungheinrich builds energy management into the truck, so the parts have to match the system. For safety we don't open or rebuild Li-ion cell packs ourselves; where a pack needs specialist work, we'll tell you straight and point you the right way.
Can you support narrow-aisle and high-level order pickers?
Yes. EKS and EKX order pickers carry an operator at height, so the platform, cage, lift chains, guidance, and controls are safety-critical and stay genuine. We supply those parts and our technicians fit them, so a high-level or VNA machine goes back to work properly — not part-fixed.
Genuine or aftermarket for Jungheinrich parts?
Genuine for the electronics, Li-ion energy system, order-picker platform, mast, and hydraulics — the precision and safety-critical parts. Quality aftermarket is usually fine for wheels, castors, filters, and routine consumables. We'll tell you which is the smart call for the part you need.
Can you fit the Jungheinrich parts as well as supply them?
Yes. Our technicians can install the parts we supply and fold the work into a repair or an AMC, so the truck leaves working and the whole job is warranted as one piece of work rather than left for you to arrange. Same-day support in Dubai, and fast scheduled service across the rest of the UAE.
Running a mixed fleet? See ourforklift spare parts hub for every major brand — or, planning your warehouse, our guide towarehouse automation vs manual operations.
Get the right Jungheinrich part
Send us your Jungheinrich truck's model and serial number — with a photo of the old part if you have one — and we'll confirm the correct part, genuine or quality aftermarket, with price and lead time across the UAE.