SPARE PARTS

EP Forklift & Warehouse Parts, Supplied & Fitted

HYLIFT is an independent EP parts specialist in the UAE — genuine and quality-matched parts for EFL Li-ion counterbalance trucks, electric pallet trucks, stackers and reach trucks, from the in-house lithium battery and integrated charger to the electronics, mast, hydraulics, and running gear.

Keep your EP fleet moving

EP (EP Equipment) has built its name on affordable lithium — Li-ion counterbalance trucks, electric pallet trucks, and stackers that give you electric running at a value price. What makes EP distinctive is that it builds its own lithium battery and integrated charger into the truck, which is exactly why the energy system and electronics reward correct, to-spec parts.

As an independent supplier we're not tied to a single price list: we source genuine EP parts and quality-matched aftermarket equivalents, and give you a straight recommendation on which to use where — which matters on a value brand, where a quality equivalent is often the smart call for a wear item. Tell us the truck and what's failed, and we'll get you the correct part with an honest read on cost and lead time.

Genuine vs Aftermarket

The honest call, part by part

A value fleet rewards the right choice — genuine where the part is electronic, load-bearing, or safety-critical, a quality equivalent where it isn't:

PartOur recommendationWhy
Li-ion battery, BMS & integrated chargerGenuine / specialistEP's own in-house energy system and safety-critical — we supply and advise, but don't open cell packs.
Traction & lift electronics (AC / PMSM)GenuineModel-specific — aftermarket often won't communicate with the truck's CAN system.
Mast, forks & lift chainsGenuineLoad-rated and safety-critical; must hold the rated load at height.
Hydraulics (cylinders, valves, seals)Genuine (usually)Lift and reach hydraulics reward exact-spec parts on a truck that runs all shift.
Pallet-truck drive & load wheelsQuality aftermarket often OKHigh-wear running-gear items where a good-brand equivalent performs and saves cost.
Castors, filters, seals, consumablesQuality aftermarket OKCommodity wear items; a good-brand equivalent performs and saves cost.
What We Supply

Parts across the whole truck

From the in-house Li-ion battery and integrated charger to the electronics, mast, hydraulics, and running gear — for counterbalance trucks, pallet trucks, stackers, and reach trucks alike.

In-house Li-ion batteries & integrated chargers

Battery packs, integrated on-board chargers, connectors, cabling, and BMS accessories for EP's Li-ion trucks. EP builds its own lithium batteries and integrated chargers into the truck, so the energy parts have to match that system — not just the voltage.

Traction & lift electronics

AC and PMSM traction and lift controllers, contactors, CAN-bus and display modules, sensors, and wiring parts. EP's trucks are electronics-led, so these are model-specific components matched to the machine — not generic swaps.

Pallet-truck & stacker parts

Drive units, load rollers and wheels, tiller heads and controls, and electrical parts for EPT electric pallet trucks and ES/ESL stackers — the walkie warehouse equipment that does the everyday moving and wears fastest.

Mast, forks & chains

Mast channels, rollers, lift and leaf chains, and forks for EFL counterbalance and RXD reach trucks — the load-bearing parts we keep genuine because they must hold the rated load at height and match spec exactly.

Hydraulics

Lift, tilt, and reach cylinders, seal kits, valves, pumps, and hoses for counterbalance and reach trucks — the working hydraulics a warehouse truck lives on all shift.

Wheels, castors, brakes & steering

Polyurethane load and drive wheels, castors, brake components, and steering parts — the running gear that wears fastest on hard warehouse floors and busy pallet routes.

The Lithium Difference

In-house batteries & value electric running

EP's whole proposition is affordable lithium: it builds its own Li-ion battery and integrated charger into the truck, so on an EP the energy system is the heart of the machine, not a bolt-on. That's what lets a business move from diesel to electric at a value price — and it's why the battery, charger, and traction electronics are the parts that keep an EP working across shifts.

We supply battery hardware, integrated chargers, connectors, and cabling for EP's Li-ion trucks and advise on the setup — but for safety we don't open Li-ion cell packs; where a pack needs specialist work we say so and point you the right way. On the value side, we're happy to fit a quality-matched equivalent for a pallet-truck wheel or a routine wear part, so you keep the low running cost that made you choose EP in the first place.

Models We Cover

From EFL Li-ion trucks to EPT pallet trucks

We supply parts across the EP range — the Li-ion counterbalance trucks, electric pallet trucks, stackers, and reach trucks you're most likely running in a UAE warehouse:

  • EFL Li-ion counterbalance (EFL181–352)
  • EFL X2 value Li-ion counterbalance
  • High-voltage electric (4–25t)
  • EPT electric pallet trucks
  • ES / ESL electric stackers
  • RXD reach trucks
Right Part, First Time

Model and serial number get us there fast

Most wasted downtime on an EP comes from fitting the wrong part, not the fault itself — and on an electronics-led lithium truck the wrong part rarely settles in quietly. The data plate gives us the model and serial number, which pins down the correct parts list. A photo of the old part or its number confirms the exact fit, which matters most for battery, charger, and electronic components. Get that right up front and the part goes on once, not twice.

Supply & Fit

We supply and we fit

A part on a shelf doesn't fix a forklift. HYLIFT's technicians can install the EP parts we supply and fold the work into a repair or an AMC, so the truck leaves working and the job is warranted as one piece of work — not a part you're left to fit yourself. Same-day support in Dubai, and fast scheduled service across the rest of the UAE.

FAQ

EP parts questions, answered

Do you supply genuine EP forklift parts?

Yes, we source genuine EP (EP Equipment) parts, and we also supply quality-matched aftermarket for routine wear items. We're an independent supplier, not an authorized EP dealer, so you get both options and an honest recommendation for each part rather than defaulting to the most expensive one.

Which EP trucks can you supply parts for?

EFL Li-ion counterbalance trucks (EFL181 through the 352 range and the X2 value series), high-voltage electric trucks up to the heavy-capacity models, EPT electric pallet trucks, ES/ESL stackers, and RXD reach trucks. Send the model and serial number and we'll find the correct part.

Can you supply EP lithium-ion batteries and chargers?

Yes — we supply battery hardware, integrated chargers, connectors, and cabling, and we advise on Li-ion setups. EP builds its own lithium battery and integrated charger into the truck, so the parts have to match that system. For safety we don't open or rebuild Li-ion cell packs ourselves; where a pack needs specialist work, we'll tell you straight and point you the right way.

Can you supply parts for EP pallet trucks and stackers?

Yes. EPT electric pallet trucks and ES/ESL stackers do the everyday moving in a warehouse, so their drive units, load rollers and wheels, tiller controls, and electrical parts wear and need replacing regularly. We stock and source the common wear parts and fit them quickly, so a walkie truck gets back to work with minimal downtime.

Genuine or aftermarket for EP parts?

Genuine for the Li-ion energy system, electronics, mast, and hydraulics — the safety-critical and precision parts. Quality aftermarket is usually fine for pallet-truck wheels, castors, filters, and routine consumables, which is where EP's value positioning makes an equivalent part the smart call. We'll tell you which is right for the part you need.

Can you fit the EP parts as well as supply them?

Yes. Our technicians can install the parts we supply and fold the work into a repair or an AMC, so the truck leaves working and the whole job is warranted as one piece of work rather than left for you to arrange. Same-day support in Dubai, and fast scheduled service across the rest of the UAE.

Get the right EP part

Send us your EP truck's model and serial number — with a photo of the old part if you have one — and we'll confirm the correct part, genuine or quality aftermarket, with price and lead time across the UAE.